Al’ar

Healers: Simplify Your Healing Tank Targets

by

New hotness

Nowadays, our raids frequently carry as little as 3 tanks to as many as 5. Keeping track of who’s heaing who can be a bit of a doozy. Even the tiniest confusion or overlap can be wipe a raid. Here’s a quick tip make assigning heals easier.

Old and Busted

In older raids, we’d have only 1 main tank and maybe a handful of off tanks. Jobs back then were pretty static. A set number of healers would overheal the main tank while the rest of the healer benchwarmers and waterboys would keep tabs on the off tanks. It worked fine then because the encounters weren’t that complicated to deal with. But oh how times have changed.

New Hotness

I’m introducing a new concept of mine that I came up with a few months ago. It started when my Guild began working on Hydross. As you know, Hydross requires 2 different tanks to jump and hold aggro on him. It doesn’t make sense to say heal the main tank. There’s only one real main tank. Even then, that main tank might be rotated off to different roles or different mobs depending on things like resistance fights and such. For some fights, it’s impossible and even inconvenient to declare a single main tank. A great example is a fight such as Al’ar where you end up using as many as 4 tanks simultaneously. When you’re fighting Leotheras, half the time you’re healing a warlock who by most definitions would not be considered your Guild’s main tank.

Chances are your Guild’s already doing it. I’m simply putting a name to it.

The Active Tank

I defined the active tank as the player that’s currently holding aggro on the main boss right now. It could be any player or any class on the the boss at any time. It’s usually determined by the target of target window.

An example of healing assignments for Al’ar on Phase 2:

  • Pete the Paladin is healing Tim who is grabbing all the birds
  • Reginald and Riley, the 2 Resto Shamans, will be healing the raid
  • Penelope, Price, and Dominic (2 Priests and a Druid) will be healing the active tank which could either be Tyler, Thomas, or Tootoo

If you’re the healing leader, you’re going to recognize what a pain in the ass it is to tell your healers:

“Heal Tyler, Tootoo or Thomas, whoever happens to have aggro on Al’ar at the moment.”

It’s easier to tell your Priests to cover the active tank. By saying that, your healers should recognize that their job is to heal whoever has aggro on the boss.

I’m always on the lookout for different labels and methods to make healing assignments easier on a raid. Are there other ways that you use or that your Guild uses to simply healing assignments more?

Healing Tips for 25-Man Raiding: WoW Insidered, Matt Reviewed

by

I woke up this morning and decided to check my grades to see how I did this semester. Turns out I got an F in Cognitive Science. Now I’m really depressed about it, but I’m working on a plan to address it next year.

Anyway, aside from that I was catching up on a little bit of light reading on WoW Insider. One of the columns featured is that on 25-man raid healing by Marcie Knox. The article essentially summarizes the tips and tricks that healers can pull off in order to succeed in end game content. Let’s see if WoW Insider experts and I agree:

You need at least one of each healing class. Yes, even a holy priest and the rare resto druid. No matter what you’ve heard, running with all paladins really won’t get you very far, nor make the journey pleasant.

Disagreed. Ideally it would be nice to have all four healing classes, but sometimes it simply isn’t possible. Can you do some 25-man content with all Paladins? Yes. Is it recommended? No. But you do not NEED a Resto Druid, Shaman, Holy Priest and Paladin. If you set it as your goal to recruit one of each healer before trying your hand at raiding, you’ll be stuck for a long time. Carnage is incredibly stacked on Paladins and Priests. We have one Resto Shaman and no Druids (WE COULD USE ONE THOUGH SERIOUSLY). We went from Karazhan to Kael since we started back in June.

You have 6-8 raid slots for healers to work with. Start with 7 and make adjustments as you go.

Agreed. Typically, I would start with 7 and work my way up or down depending on the following:

  • The encounter
  • The gear of healers
  • The skill of healers

You’ll only need to do this the first few times when you’re working on a boss. After a while, when bosses can be done with no effort, you can remove healers as necessary to speed up the fight.

All healers must have the following information instantly available at all times:
a) Raid Health Monitor
b) Range Indicator

Kinda. I do keep the raid health monitor window open but I never make use of it. I’m not sure if Knox refers to the health of the entire raid as a percentage or the health of each individual raid member. Regardless,everyone’s health bar should be on the screen. Don’t just have your party window open in a raid.

As for the Range Indicator, it’s a good idea to have one. I’ve grown accustomed to my Priest that I can visually tell whether or not I’m in range of my tank. If I’m able to, I do a quick range check before a boss by lighting up a Prayer of Mending to ensure line of sight is not an issue. It’s a good tip for Alar when you’re not sure if the ledge the tank is standing on is going to interfere with your LOS heals. If your tank isn’t, a quick bark over vent should move them an inch or so over.

Have at least 2 people willing and able to handle the healing assignments.

Agreed. When I run my pickup Magtheridon, I make a deal with my partner. He runs the strats and I take care of the healing. He tells me whose tanking what, and then I pick out the healers who’re going to cover each tank.

In Carnage, our healers take it one step further. The raid leader puts up icons and calls out which tank is on which trash mob. Our healers take a more active approach and type in our healer channel which tank we’ll cover. Here’s an example for Hydross:

  • Resto Shaman: Raid
  • Holy Paladin 1: Water Tombs
  • Holy Paladin 2: Active Tank
  • Me: Active Tank
  • Holy Priest 2: Melee DPS
  • Holy Paladin 3: Elemental Tanks
  • Holy Paladin 4: Elemental Tanks

Active tanks refers to the one who is currently tanking the boss. Remember Hydross needs to be alternated between two tanks. This way, our healers are much more alert and everyone is accounted for. We have clearly defined our roles to ourselves and to each other.

You’ll need a way to do healing assignments. Here’s some common methods:
Macros – Easy, in-game, and nothing to download; this is what I use
Text File – WoW crash-proof, alt+tab then copy/paste into chat; Notepad, etc. (Watch for the multi-line limit)
Text Addons – Like a text file but in-game, good if you have 1k macros already; Notes (Is it still around? Can’t find it.), etc.
Assignment Addons – Fill out a form

Agreed. Typing it by hand sucks. Typing it again because someone was AFK sucks more. Personally, I use macros. Example:

/rw HEALING ASSIGNMENTS:
/rw —
/rw Tank 1: Healer A, Healer B
/rw Tank 2: Healer C
/rw Tank 3: Healer D
/rw Tank 4: Healer E
/rw Raid: Healer F and G

I mainly use this one for my own pickup raids on Mag and it spits out nice lines and alerts everyone.

Set up a healing channel to broadcast the assignments or use the Guild Info window if you’re an officer

Agreed. A typical channel name is GuildHeal or something. Just type /join GuildHeal and type / followed by the channel number. Usually it’s something like /5.

I like to change the color of all the text in the healer channel to something bright so that it stands out. To do this, right click on the tab above your chat window (General). Mouse over to Channels, then there should be a red square next to the name GuildHeal. Click the square and a color wheel should pop up. Drag the circle to any color you like.

Get set up to record your combat log and parse it via WWS.

Agreed. Post raid analysis is always important when you can’t seem to do a boss properly. You need to troubleshoot and diagnose the problems in order to fix it. For in game, I suggest an addon called Recount. I’m going to post an indepth guide to it later on in the week when I start accumulating some screenshots.

Well for the most part, it looks like we do agree and emphasize the same things (except for the first point). Knox’s healer is in Mount Hyjal. My Guild’s working on Kael. Who knows? Maybe I’ll radically change my views once I get into Hyjal.