addon

Don’t Rely on Addons to Heal

by

A few nights ago, I decided to participate in a Heroic Naxx pug (and you know my thoughts on the subject). But I always go back to it since I like to use my Shaman to decompress.

Like most pugs, we stood around for 30 minutes (literally) for the lead to dish out instructions. The boss we were about to engage was Gluth. We were about to run through the pipe, but we had to hold off and wait for a Paladin.

Now you might think this is trivial. But wait until I tell you why.

“My HealBot is not working properly. I can’t heal without it.”

As you can imagine, that sent a nasty surge up my spine. Here’s a Paladin. He’s been assigned to main tank healing. And he can’t heal without his Healbot?

Is it truly that difficult to do nothing but hit the Flash of Light or Holy Light keys at will?

After the 30 minute brief, we had to wait around for an additional 10 minutes (multiplied by 24 players and thats 240 minutes or 4 hours) for this guy to get his addon going.

Airline pilots have a wide variety of electronics and instruments at their disposal. Most of the time, they can toggle the autopilot. When push comes to shove, they have to take manual control of their plane. Sometimes emergencies happen. Perhaps there’s a circuit fried somewhere rendering GPS useless. They have to be trained to be able to make visual landings of their aircraft under extreme weather circumstances.

Lesson 1

Good healers use addons to heal. But great healers don’t have to rely on them.

Don’t get me wrong. I think HealBot is a good tool. As is Clique, Grid, and whatever else you decide to use. At the same time, the next time you go on a farm raid try toggling off and healing in vanilla mode. The point isn’t to see if you like it. Because I guarantee you, you won’t. The point is to see if you can do it. Blizzard will make patches and they will continue to update the game. Addons will break or error out on certain fights. Sometimes updates will come out days or even weeks later.

Would you delay raiding because a key addon you need isn’t available?

I should hope not.

I love my Pitbull as much as the next guy. But if I need to heal by pulling out the raid frames manually, I can. Sure it reduces my overall effectiveness, but at least I won’t be handcuffing the raid.

Lesson 2

Check your addons before entering a raid to ensure that they’re working properly.

This goes without saying. But a 10 second check saves 10 minutes of heartache.

AddOn: Dispel Announcer for Raiding and PvP

by

dispel-4

I finally found me a mod that I think will benefit all Priests regardless of their purpose or style of healing. Actually, it doesn’t have anything to do with healing at all. What it does is it announces Dispels in a chat channel of your preference. It’s fairly flexible in the the settings (see below screenshots). I do believe it works with Mass Dispel as it announced me taking off a Paladin’s bubble and it works on offensive and defensive dispels. The Ace 2 framework is required for you to modify any settings.

More importantly,This addon has been fully tested on a Hunter dispelling enemy buffs with Arcane Shot and with a Druid dispelling poisons but it should also work perfectly when dispelling with any other skill.

Get Dispel Announcer from Curse.

It also announces when debuffs on yourself fall off such as Shouts and such.

Works in:

  • Say chat
  • Party chat
  • Raid warning
  • UI error frame
  • Default frame

Locations:

  • Outside
  • 5-man
  • Raid
  • Battleground
  • Arena

Anyway,  have a gander at the shots below and you’ll get a rough idea.

dispel-2

dispel-1

dispel-3

dispel-5

Addon: Instant Health is Pants Crappingly Awesome

by

During this weeks Twisted Nether blogcast, one of the questions posed by Fimlys was what addons I currently favor the most. I said to him that I favoured Pitbull the most but there was another addon called Instant Health that was beginning to grow on me. I touched about it in some details on the blogcast and promised a blog post specifically on the addon and here it is.

The problem

WoW servers don’t update health bars instantaneously. The information is sent from a player to the server, then from the server to your UI. There are two interaction points where lag due to hardware or ISP issues can cause problems, and although this typically happens in regular intervals, it can take as long as 3 seconds to complete.

All healers have been in situations where their heals have gone off, yet the target still died. Cooldowns and trinkets were blown at the last possible moment to add more “oomph” to their heals. Our efforts were futile because even though it showed that we did cast our instants, it did not appear to have been tracked or anything.

The solution

I acted on a tip from Aylii and Lang, my main tank. They both advised me to take a hard look at an addon called Instant Health. The beta was released a little over a week ago. So what’s it about?

This addon updates the health of player/party/raid members and pets much faster than normal by using your local combat log data rather than waiting for the server to send updated health information to you.

It works with Blizzard’s default UI as well as ANY custom addon you might have installed. All you need to do is put it in your addons folder and enable it!
Notice, this addon only speeds up health updates for player/party/raid members and pets. (People that are recorded in your combat log.) Players/mobs that are not in your group will have their health updated normally.

The trial

Intrigued, I had to get a copy of the addon quickly and stress-test the sucker. I forwarded a copy to Wynthea as well, so we could compare notes afterward. So how did Instant Health stack up to our combined play?

In a word, scary. This mod updates health lightning fast. You’ll get a better idea by observing a protection Paladin tanking waves of trash in Mount Hyjal. By updating health on a much faster scale, I’ve found that I’ve been able to make decisions even quicker. Information is life for healers and the faster we get it the faster we can make choices. It’s an awesome addon for us twitch healers that rely on quick reactions. Non healers might think that it’s redundant for an addon that updates heath only a fraction of a second sooner than server updates but they wouldn’t understand. 9 out of 10 Matts agree that this addon is an absolute must have for any raiding healer (the other Matt passed out in shock and stress of watching health bars drop too fast).

-Matticus

I’m very impressed with the potential of this add-on. Personally, I heal less Whack-a-mole style, and more proactively – paying attention primarily to those with aggro – so the benefit to my reaction time on MT healing is negligible. Where this mod really shines is with tough decision-making: you can see which player’s health is dropping fastest and react with better information. The biggest drawback to Instant Health is that when it acesses the information, it somehow changes what is reported to any other combat log parser you may use. Recount, SWstats, WWS, and Recap will all be so dramatically skewed that they become unusable. If you feel like rolling up your sleeves, you CAN fix it yourself – rename the addon’s directory, LUA file, and TOC to ZZZ_Instant_Health, so that the order-of-access is properly aligned. (If you don’t feel completely comfortable doing this, DON’T!) There is also a minor issue affecting default UI Target-of-Target frames that cannot be corrected. Other raid-frames do not have this problem. These relatively minor issues aside, I think this is a great tool. Spell Haste is becoming more and more important as a stat, and anything else that can decrease the time it takes to get a heal on someone that needs it is huge.

-Wyn

Addon: Don’t Be a Friend, be a Shaman Friend!

by

At first glance, most players might not recognize what that is. As Shamans, we have a huge variety of tools at our disposal to deal with buffs and spellcasts. Jin was sporting a spiffy addon throughout WSG weekend and I had to ask him about it. It’s called Shaman Friend. Basically, it outputs selection actions into party chat, raid chat, say chat, or raid warning.

Totally handy for PvP action. I wonder if there’s something like that for Priests.

Features

I pulled this list right from the Curse description.

– Alert if no Elemental Shield is present in combat
– Alert if no Weapon Enchant is present in combat
– Show total Windfury damage on screen with crits/misses
– Show buffs removed by Purge and/or broadcast the buffs to the chat window
– Show spell interrupted by Earth Shock and/or broadcast it to the chat window
– Show a message when Lightning Overload procs
– Show how the duration of Frost Shock on your target are affected by Dimnishing Return and showing when Diminishing Return goes off.
– Show when your Grounding Totem absorbs a spell
– Show when one of your T5 bonuses procs
– Option to select which sound to use when notified (or turn it off completely)
– Can print messages in MSBT, SCT, Parrot and a few others.
– Show a message whenever you cast Bloodlust/Heroism or Mana Tide
– Separate frame allowing for easy Earth Shield tracking and recast

So what’re you waiting for? Go grab it now!

Healing Tips for 25-Man Raiding: WoW Insidered, Matt Reviewed

by

I woke up this morning and decided to check my grades to see how I did this semester. Turns out I got an F in Cognitive Science. Now I’m really depressed about it, but I’m working on a plan to address it next year.

Anyway, aside from that I was catching up on a little bit of light reading on WoW Insider. One of the columns featured is that on 25-man raid healing by Marcie Knox. The article essentially summarizes the tips and tricks that healers can pull off in order to succeed in end game content. Let’s see if WoW Insider experts and I agree:

You need at least one of each healing class. Yes, even a holy priest and the rare resto druid. No matter what you’ve heard, running with all paladins really won’t get you very far, nor make the journey pleasant.

Disagreed. Ideally it would be nice to have all four healing classes, but sometimes it simply isn’t possible. Can you do some 25-man content with all Paladins? Yes. Is it recommended? No. But you do not NEED a Resto Druid, Shaman, Holy Priest and Paladin. If you set it as your goal to recruit one of each healer before trying your hand at raiding, you’ll be stuck for a long time. Carnage is incredibly stacked on Paladins and Priests. We have one Resto Shaman and no Druids (WE COULD USE ONE THOUGH SERIOUSLY). We went from Karazhan to Kael since we started back in June.

You have 6-8 raid slots for healers to work with. Start with 7 and make adjustments as you go.

Agreed. Typically, I would start with 7 and work my way up or down depending on the following:

  • The encounter
  • The gear of healers
  • The skill of healers

You’ll only need to do this the first few times when you’re working on a boss. After a while, when bosses can be done with no effort, you can remove healers as necessary to speed up the fight.

All healers must have the following information instantly available at all times:
a) Raid Health Monitor
b) Range Indicator

Kinda. I do keep the raid health monitor window open but I never make use of it. I’m not sure if Knox refers to the health of the entire raid as a percentage or the health of each individual raid member. Regardless,everyone’s health bar should be on the screen. Don’t just have your party window open in a raid.

As for the Range Indicator, it’s a good idea to have one. I’ve grown accustomed to my Priest that I can visually tell whether or not I’m in range of my tank. If I’m able to, I do a quick range check before a boss by lighting up a Prayer of Mending to ensure line of sight is not an issue. It’s a good tip for Alar when you’re not sure if the ledge the tank is standing on is going to interfere with your LOS heals. If your tank isn’t, a quick bark over vent should move them an inch or so over.

Have at least 2 people willing and able to handle the healing assignments.

Agreed. When I run my pickup Magtheridon, I make a deal with my partner. He runs the strats and I take care of the healing. He tells me whose tanking what, and then I pick out the healers who’re going to cover each tank.

In Carnage, our healers take it one step further. The raid leader puts up icons and calls out which tank is on which trash mob. Our healers take a more active approach and type in our healer channel which tank we’ll cover. Here’s an example for Hydross:

  • Resto Shaman: Raid
  • Holy Paladin 1: Water Tombs
  • Holy Paladin 2: Active Tank
  • Me: Active Tank
  • Holy Priest 2: Melee DPS
  • Holy Paladin 3: Elemental Tanks
  • Holy Paladin 4: Elemental Tanks

Active tanks refers to the one who is currently tanking the boss. Remember Hydross needs to be alternated between two tanks. This way, our healers are much more alert and everyone is accounted for. We have clearly defined our roles to ourselves and to each other.

You’ll need a way to do healing assignments. Here’s some common methods:
Macros – Easy, in-game, and nothing to download; this is what I use
Text File – WoW crash-proof, alt+tab then copy/paste into chat; Notepad, etc. (Watch for the multi-line limit)
Text Addons – Like a text file but in-game, good if you have 1k macros already; Notes (Is it still around? Can’t find it.), etc.
Assignment Addons – Fill out a form

Agreed. Typing it by hand sucks. Typing it again because someone was AFK sucks more. Personally, I use macros. Example:

/rw HEALING ASSIGNMENTS:
/rw —
/rw Tank 1: Healer A, Healer B
/rw Tank 2: Healer C
/rw Tank 3: Healer D
/rw Tank 4: Healer E
/rw Raid: Healer F and G

I mainly use this one for my own pickup raids on Mag and it spits out nice lines and alerts everyone.

Set up a healing channel to broadcast the assignments or use the Guild Info window if you’re an officer

Agreed. A typical channel name is GuildHeal or something. Just type /join GuildHeal and type / followed by the channel number. Usually it’s something like /5.

I like to change the color of all the text in the healer channel to something bright so that it stands out. To do this, right click on the tab above your chat window (General). Mouse over to Channels, then there should be a red square next to the name GuildHeal. Click the square and a color wheel should pop up. Drag the circle to any color you like.

Get set up to record your combat log and parse it via WWS.

Agreed. Post raid analysis is always important when you can’t seem to do a boss properly. You need to troubleshoot and diagnose the problems in order to fix it. For in game, I suggest an addon called Recount. I’m going to post an indepth guide to it later on in the week when I start accumulating some screenshots.

Well for the most part, it looks like we do agree and emphasize the same things (except for the first point). Knox’s healer is in Mount Hyjal. My Guild’s working on Kael. Who knows? Maybe I’ll radically change my views once I get into Hyjal.